Advanced design of the FDA quality polypropylene separator discs and sealing rings promotes more even liquid flow within each cell. This in turn tends to reduce the pressure drop across the module, leading to longer module life, shorter filtration cycles and more consistent filtrate quality.
Lenticular housings
These are available in 12" and 16" diameter in either single or multi module version, up to 4 high, to suit small scale laboratory or pilot plant production to large scale continuous production. These can be stand alone or skid mounted.
Lenticular module lifting device
In 16" diameter format the weight of a used module can be unsuitable for manual lifting. This is especially true when multiple housings, with 3 to 4 high modules in each, have to be changed out. Since a suitable hoist is required to remove the dome cover Carlson have developed a lenticular lifting device to utilise this hoist. The lifting device can remove the complete set of spent modules from a housing in one simple and safe lift. The lifting device comes in sizes to accommodate 2, 3 or 4 modules high. The lifting device simply clamps the lower module, lifts the complete stack of modules and these spent modules can then be discharged into a suitable disposal unit with a pull of the discharge handle.
